Fixing Tapes and Accessories | Wall Wraps and Roof Sarking

Bradford's range of tapes and accessories are designed to complement our Enviroseal™ and Thermoseal wall wraps and roof sarking products, ensuring excellent long term adhesion properties.

Bradford ULTRAtape

Bradford ULTRAtape is a hand tearable, reinforced tape with single sided adhesive which develops a high bond strength over time.

It is designed for use with pliable building membranes such as the Bradford Enviroseal™ and Thermoseal ranges of wall wrap and roof sarking products, and is suitable for sealing overlaps, joints, and penetrations, as well as repairing pliable building membranes.

Bradford ULTRAtape may also be used on concrete, steel, aluminium, timber, and window flashings where the material is sufficiently smooth.

Bradford ULTRAtape Installation Guide

Loading component...

Enviroseal™ Black Label Tape

Enviroseal Black Label Tape is a single sided adhesive tape recommended for use with the Enviroseal™ Wall Wrap BL vapour permeable construction membrane. Designed specifically for use on open joint facades, sealing around doors, windows and pipes, Enviroseal Black Label Tape provides an exceptionally high initial grab, even in high humidity areas. Enviroseal Black Label Tape can also be used as a repair tape for any accidental rips or tears that may occur to the membrane material. Enviroseal Black Label Tape Product Technical Statement

Loading component...

Enviroseal™ HighTack Tape

Enviroseal™ HighTack Tape is a single sided aggressive adhesive tape with a high initial grab and flexible carrier.

It is ideal for use as an air and water tight seal on vapour permeable construction membranes and as a vapour barrier around pipes, windows, overlaps and penetrations.

Enviroseal™ HighTack Tape has good ageing resistance, long term flexibility and resistance to plasticizer migration. It is free of solvents, chlorine and formaldehyde. The elasticity of the HighTack Tape copes well with limited building movement and thermal expansion.

Suitable for use with:

PA, PE, PP films (smooth, light rough)
Aluminum foils
Fleece
OSB (Oriented strand board)
Coated timber
Chipboard
Plastics
Paperboards
Kraft papers
Wood
Glass
Metal

HighTack Tape Product Technical Statement (Datasheet)

Loading component...

PlastiGrip Washer

Plasti-Grip washers are ideal for high wind environments or steel frame applications where a combination of screw and washer provide a more evenly distributed load on the membrane (suitable for all membranes).

Enviroseal™ Double Sided Tape

Enviroseal™ Double Sided Tape is a double sided aggressive adhesive tape with a high initial grab and flexible carrier.

It is ideal for use as a positioning and temporary attachment method between vapour permeable construction wraps and building frames during construction.

Enviroseal™ Double Sided Tape is not designed as a permanent attachment method and must be replaced by battens or cladding fasteners within a suitable time frame to prevent degradation by wind.

Enviroseal Double Sided Tape Product Technical Statement

Wall Wrap and Roof Sarking Fixing Tapes and Accessories

Bradford ULTRAtape, Enviroseal Black Label Tape, Enviroseal Double Sided Tape, Enviroseal™ HighTack Tape, Plasti-Grip Washer

Bradford's range of tapes and accessories are designed to complement our Enviroseal™ and Thermoseal wall wraps and roof sarking products, ensuring excellent long term adhesion properties.

Bradford ULTRAtape

Loading component...

Enviroseal™ Black Label Tape

Loading component...

Enviroseal™ HighTack Tape

Loading component...

Loading component...

Loading component...

PlastiGrip Washer

Enviroseal™ Double Sided Tape

Loading component...

Find a Stockist or Installer

Loading component...

Loading component...

Loading component...

Find a Stockist or Installer

Loading component...