Bradford Gold® Hi-Performance Perimeter Batts
Bradford Gold Hi-Performance R3.0 Ceiling Perimeter Batts are low-profile, high R-value batts made for perimeter roof spaces near the eaves. Their low-profile design helps to reduce ceiling insulation compression within 450mm of the external wall under pitched roofs, ensuring easy installation and NCC compliance.
Bradford Gold Ceiling Perimeter Batts are suitable for all construction types where space is a premium and obtain all the standard convenient features of the Bradford Gold Hi-Performance range. Australian-made, non-combustible and low allergen, they hold their thickness over time and are supported by CSR Bradford technical advice and a 70-year performance warranty.
Features and Benefits
Bradford Gold Perimeter Batts (HP) solve the tricky edge zone where roof height is limited, delivering a high R-value in a slimmer profile to help ensure that the ceiling insulation does not come in contact with the underside of the roof cladding or sarking. The pre-cut lengths speed installation and reduce cutting on site, while dense, resilient glasswool helps steady indoor temperatures and can lower energy use. Paired with the Bradford Perimeter Spacer and Bradford Gold ceiling batts, they provide a complete and compliant perimeter solution for residential homes.
Key Features
Thermal performance
High R3.0 at the ceiling perimeter to help maintain a continuous insulation layer
Fire safety
Non-combustible glasswool for added peace of mind
High-performance
Low-profile HP construction targets tight eave zones without sacrificing R-value
Easy to install
Pre-cut 400 mm pieces reduce on-site cutting for a clean, consistent finish
Range
A focused range that makes specifying and ordering straightforward.
Bradford Gold Hi-Performance Perimeter Batts
- R-value: R3.0
- Thickness: 100 mm
- Pre-cut to 400 mm for perimeter roof spaces and tight ceiling cavities
- Widths to suit common joist spacings.
Technical Specifications
| Material R-Value | Thickness (mm) | DImensions | Pieces per Pack | m2 per pack | Packs per Multi | Product Code |
| R3 | 100 | 1200mm x 430mm | 5 | 2.58 | 6 | 489105^ |
| R3 | 100 | 1200mm x 580mm | 5 | 3.5 | 6 | 489106^ |
^AS/NZS 1530.3 Test Report available.
Material R-values are determined in accordance with AS/NZS 4859.1 at 23°C and apply to the product installed at nominal thickness.
Performance Guaranteed
Australian Made
Licensed by Australian Made Campaign Limited to use the Australian Made logo.
FBS-1 Glasswool
FBS-1 Glasswool Insulation products are classified as Non-Hazardous according to the Globally Harmonised System (GHS) and Safe Work Australia.
Sensitive Choice
Certified by an independent expert panel to meet the health and safety standards of the Sensitive Choice program for asthma and allergy friendly products.
ISO 9001
Meets the ISO 9001 standards for quality management through independent verification.
